!
!
hdr-advantage
PH/ORP Meters
!
wq510

Benchtop Water Quality Meter/Stirrer

Extech Instruments
WQ500
Magnetic stirrer with pH, mV, and Temperature measurements
  • Built-in stirrer with 30, 60, and 120 minute timer or continuous operation
  • Large backlit dual LCD simultaneously displays measurement and temperature
  • 2 or 3 point pH calibration for better accuracy (4, 7, and 10pH)
  • Automatic Temperature Compensation
  • Memory stores up to 150 readings
  • Complete with pH glass electrode & calibration solutions, temperature probe, electrode clamp and rod, software and USB cable and AC adapter

    datasheet:  http://www.extech.com/instruments/resources/datasheets/WQ500data.pdf

  • wq530

    Benchtop Water Quality Meter/Stirrer

    Extech Instruments
    WQ530
    Magnetic stirrer with DO, Conductivity, TDS, Salinity, pH, mV, and Temperature measurements
  • Built-in stirrer with 30, 60, and 120 minute timer or continuous operation
  • Large backlit dual LCD simultaneously displays measurement and temperature
  • 2 or 3 point pH calibration for better accuracy (4, 7, and 10pH)
  • Manual salinity (0-50ppt) and altitude (0-20k ft) compensation for DO measurements
  • One point Conductivity calibration - automatically recognizes 4 calibration solutions
  • Adjustable Conductivity to TDS ratio from 0.5 to 1.0
  • Automatic Temperature Compensation
  • Memory stores up to 150 readings
  • Complete with pH, conductivity & DO probes & calibration/fill solutions, temperature probe, electrode clamp and rod, software and USB cable and AC adapter

    datasheet:  http://www.extech.com/instruments/resources/datasheets/WQ500data.pdf

  • 407228

    Heavy Duty pH/mV/Temperature Meter Kit

    Extech Instruments
    407228
    Rugged pH meter with pH electrode, Temp probe and carrying case
  • Kit includes pH/mV/Temperature meter, mini pH electrode, Temperature probe, and carrying case
  • Dual display for pH or mV and Temperature (°C/°F)
  • Large 1.4" (36mm) LCD display
  • Easy 2 point Slope and Cal adjustments at pH 4 and pH 7
  • Manual and Auto Temperature Compensation using temperature probe
  • Min/Max/Avg, Auto off and Data Hold
  • Built-in RS-232 PC interface with optional Data Acquisition Software and Datalogger

    datasheet: http://www.extech.com/instruments/resources/datasheets/407227_407228.pdf

  • do610

    ExStik® II DO/pH/Conductivity Kit

    Extech Instruments
    DO610
    Measures Dissolved Oxygen, pH, Conductivity, TDS, Salinity and Temperature
  • Includes EC500 pH/Conductivity meter with combination high accuracy multi-ranging Conductivity sensor for Conductivity, TDS, Salinity, pH and Temperature measurements
  • Includes DO600 Dissolved Oxygen meter with electrode, replacement membrane cap, electrolyte, and polishing paper
  • Complete with 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 plastic cups, batteries and carrying case

    datasheet:  http://www.extech.com/instruments/resources/datasheets/DO610.pdf

  • ec500

    Waterproof ExStik® II pH/Conductivity Meter

    Extech Instruments
    EC500
    Combination flat surface pH electrode with autoranging high accuracy Conductivity cell
  • Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
  • 9 units of measure: pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
  • Analog bargraph indicates trends
  • Memory stores up to 25 labeled readings
  • Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
  • RENEW feature alerts user when electrode needs replacement
  • Order Conductivity standards and pH buffers separately
  • Complete with meter and electrode, protective cap, sample cup, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap

    datasheet:  http://www.extech.com/instruments/resources/datasheets/EC500.pdf

  • ec510

    Waterproof ExStik® II pH/Conductivity Meter Kit

    Extech Instruments
    EC510
    Combination flat surface pH electrode with autoranging high accuracy Conductivity cell
  • Kit includes: EC500 meter, 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 cups, batteries and carrying case
  • Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
  • 9 units of measure: pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
  • Analog bargraph indicates trends
  • Memory stores up to 25 labeled readings
  • Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
  • RENEW feature alerts user when electrode needs replacement

    datasheet:  http://www.extech.com/instruments/resources/datasheets/EC500.pdf

  • ex900

    ExStik® 4-in-1 Chlorine, pH, ORP and Temperature Kit

    Extech Instruments
    EX900
    Chlorine, pH, ORP and Temperature measurements with all the necessary accessories
  • Includes CL200 meter, pH and ORP electrodes, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case
  • 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)
  • Flat surface electrodes work in liquids, semi-solids and solids
  • Memory stores and recalls 15 readings and saves last calibrated value
  • Large 3-1/2 digit (2000 count) Digital display with bargraph
  • Automatic electronic self calibration for Chlorine and ORP; 1, 2 or 3 point buffer calibration for pH
  • Data Hold, Auto shut-off and low battery indication
  • Simultaneous display of ppm or pH and °C/°F Temperature
  • Automatic Temperature Compensation

    datasheet:  http://www.extech.com/instruments/resources/datasheets/EX800_900data.pdf

  • ph100

    ExStik® pH Meter

    Extech Instruments
    PH100
    Meter with flat surface electrode for fast and easy on-the-spot pH measurements
  • Built-in Smart chip offers advanced functions and features to a stick style pH meter not found anywhere else
  • RENEW feature that tells you when it’s time to replace your pH electrode
  • CAL feature that tells you when it’s time to recalibrate your meter
  • Flat Surface pH electrode that is completely waterproof and rugged enough to withstand harsh environments
  • Analog bargraph originates at neutral point (pH 7.00) to conveniently view trends in acidity or alkalinity
  • Temperature measurements with Atomatic Temperature Compensation
  • 1, 2 or 3 point calibration automatically recognizes buffer solutions. Order pH buffers separately
  • Complete with flat surface pH electrode, protective sensor cap, sample cup with cap, four 3V CR-2032 button batteries, and 48" (1.2m) neckstrap

    datasheet:  http://www.extech.com/instruments/resources/datasheets/PH100data.pdf

  • ph110

    ExStik® Refillable pH Meter

    Extech Instruments
    PH110
    Unique pH stick meter with rugged refillable flat surface pH electrode
  • Refillable pH electrode that can be reused by refilling the reference solution once it depletes
  • Obtains continuous high accuracy using fresh reference solution
  • Fast and easy steps to refill your electrode
  • Eliminates the concern of electrode shelf life
  • 1, 2 or 3 point calibration automatically recognizes buffer solutions. Order pH buffers separately
  • Complete with refillable pH electrode, 1.5mL bottle KCI, 2 reference junctions, 2 removal tools, protective cap, sample cup, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap

    datasheet; http://www.extech.com/instruments/resources/datasheets/PH110data.pdf

  • ph150-c

    ExStik® Concrete pH Kit

    Extech Instruments
    PH150-C
    Provides fast and easy on-the-spot pH measurements on concrete
  • Flat surface electrode design
  • 3ft (1m) extension cable with probe guard/weight attaches to the flat surface Concrete pH Meter for taking measurements on flat concrete surfaces
  • Rust-resistant metal weight helps keep electrode in contact with the wet concrete surface
  • Memory records and recalls 25 sequentially tagged readings allowing detection of changes over time
  • Analog bargraph displayed on LCD
  • 1, 2 or 3 point calibration automatically recognizes buffer solutions
  • Simultaneous display of pH and Temperature with ATC
  • Data Hold, Auto power off and low battery indication
  • Waterproof/dustproof design floats in water and protects the meter in wet environment
  • Complete with pH electrode, plastic stand, 1m extension cable with weighted probe guard, plastic bottle, batteries, neckstrap and carrying case

    datasheet:  http://www.extech.com/instruments/resources/datasheets/PH150-Cdata.pdf